Cleanfit CPA472D - Retractable assembly for harsh process conditions

Manual or automatic retractable assembly Cleanfit CPA472D

Heavy-duty assembly for chemical and power industries

CPA472D

Jämför

Cleanfit CPA472D assembly for harsh process conditions

En överblick över specifikationer

Process temperature

0 to 140 °C (32 to 284 °F)
Process pressure

0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation
0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation

Visa alla specifikationer

Applikationsområde

The Cleanfit CPA472D assembly is designed for harsh process conditions. It offers a great variety of rugged materials to operate your sensors safely even under high pressure, high temperature or in aggressive media. The assembly allows you to replace sensors without interrupting the process or to clean and calibrate them automatically via the optional control system. Benefit from easy, time-saving sensor handling and an extended operating life of the sensors.

The Cleanfit CPA472D is intended for installation in tanks or pipes in:

Chemical industry
Power plants
Biodiesel plants

It is suitable for use with pressures of up to 10 bar.

Fördelar

Extremely robust: Suitable for use with pressures of up to 10 bar and temperatures of up to 140° C even as PEEK, PVDF, conductive PVDF versions
Maximum chemical resistance ensures long operating times
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Flexible adaptation to all applications by great variety of materials and process connections

Kundcase

Automated pH measuring point in wastewater

The Dow plant in Stade relies on Endress+Hauser solutions for pH monitoring in the treatment of production wastewater.
Läs hela berättelsen
Water/steam circuit at GETEC PARK.SWISS

GETEC SWISS.PARK improves plant efficiency and decreases downtimes thanks to Endress+Hauser SWAS System
Läs hela berättelsen
Measurable and testable: Monitoring with Teqwave

Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Läs hela berättelsen
Liquid analysis in LNG trains

The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Läs hela berättelsen
Improved thickener operation at Minera Valle Central

The measurement of interface in thickeners is done manually, while the turbidity measurement is done by obtaining samples sent to the laboratory. With Endress+Hauser there is an automated solution.
Läs hela berättelsen

Enkla produkter
Enkla att välja, installera och använda

Tekniska egenskaper

Enkelhet

Vad är FLEX?

Standardprodukter
Pålitliga, robusta och lätta att underhålla

Tekniska egenskaper

Enkelhet

Vad är FLEX?

High-end produkter
Mycket funktionella och praktiska

Tekniska egenskaper

Enkelhet

Vad är FLEX?

Specialprodukter
Designade för krävande applikationer

Tekniska egenskaper

Enkelhet

Varierande

Vad är FLEX?

FLEX urvalet	Tekniska egenskaper	Enkelhet
F L E X Fundamental urvalet Möt dina grundläggande mätbehov	Tekniska egenskaper	Enkelhet
F L E X Lean urvalet Hantera dina kärnprocesser med enkelhet	Tekniska egenskaper	Enkelhet
F L E X Extended urvalet Optimera dina processer med innovativa teknologier	Tekniska egenskaper	Enkelhet
F L E X Xpert urvalet Hantera dina mest utmanande applikationer	Tekniska egenskaper	Enkelhet Varierande

Lär dig mer om FLEX urvalet

Det här kanske också intresserar dig

Om oss
Utan armatur – ingen mätning!

Säkerheten och enkelheten att hantera en analytisk mätpunkt börjar med rätt armatur. Vår flexibla armaturproduktion säkerställer att du får rätt armatur för dina behov.
Mer information

Mätprincip

Potentiometric
Application

Chemical industry, biodiesel plants, power plants, plant design, tanks, process vats or pipes
Installation

Retractable holder
Characteristic

For tanks and process vats and pipelines or pipes (min. DN80)
The robust retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 6 bar
Design

Manual or pneumatical
Material

Electrode holder, rinse chamber and raised face:
PEEK, PVDF, conductive PVDF, Alloy C22, stainless steel 1.4571
Seals: EPDM, FPM (Viton) or FFKM (Kalrez®)
Dimension

Immersion depth: 146 or 280 mm (5.75 or 7.87 inch)
Process temperature

0 to 140 °C (32 to 284 °F)
Process pressure

0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation
0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation
Connection

Process connections: Flange DN 50, DN 80, ANSI 2", JIS IS10K50A, internal thread G1¼

Mätprincip

Sensor ORP / Redox
Application

Chemical industry, biodiesel plants, power plants, plant design, tanks, process vats or pipes
Installation

Retractable holder
Characteristic

For tanks and process vats and pipelines or pipes (min. DN80)
The robust retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 6 bar
Design

Manual or pneumatical
Material

Electrode holder, rinse chamber and raised face:
PEEK, PVDF, conductive PVDF, Alloy C22, stainless steel 1.4571
Seals: EPDM, FPM (Viton) or FFKM (Kalrez®)
Dimension

Immersion depth: 146 or 280 mm (5.75 or 7.87 inch)
Process temperature

0 to 140 °C (32 to 284 °F)
Process pressure

0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation
0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation
Connection

Process connections: Flange DN 50, DN 80, ANSI 2", JIS IS10K50A, internal thread G1¼

Vi värdesätter din integritet

Vi använder cookies för att förbättra din användarupplevelse, samla in statistik för att optimera webbplatsens funktionalitet och leverera skräddarsydda annonser eller innehåll.

Välj "Acceptera alla", för att samtycka till vår användning av cookies.
För mer information se vår Cookie Policy .

	EN	SV
08/10/2013
01/06/2010
01/05/2006

Språk:	Engelska
Version:	08/10/2013
Filstorlek:	940.5 KB
Filnamn:	TI00403CEN_1313.pdf

	EN	SV
08/10/2013
01/09/2010
01/05/2006

Språk:	Engelska
Version:	08/10/2013
Filstorlek:	1.3 MB
Filnamn:	BA00403CEN_1313.pdf

	EN	SV
22/07/2015
01/07/2006

Språk:	Japanska
Version:	08/02/2024
Filstorlek:	2.6 MB
Filnamn:	CP00010CJA_1315_1024_pH_selection_guide.pdf

Språk:	Tyska
Version:	01/12/2021
Filstorlek:	3.3 MB
Filnamn:	CP00010CDE_1621_pH Auswahlhilfe_2021.pdf

Språk:	French
Version:	01/07/2016
Filstorlek:	673.1 KB
Filnamn:	CS01496CFR-0216-Agnico Eagle.pdf

Språk:	Engelska
Version:	02/12/2021
Filstorlek:	3.2 MB
Filnamn:	CP00010CEN_1621_pH selection guide_2021.pdf

	EN	SV
14/08/2020

Manual or automatic retractable assembly Cleanfit CPA472D

Heavy-duty assembly for chemical and power industries

En överblick över specifikationer

Process temperature

Process pressure

Applikationsområde

Fördelar

Kundcase

Automated pH measuring point in wastewater

Water/steam circuit at GETEC PARK.SWISS

Measurable and testable: Monitoring with Teqwave

Liquid analysis in LNG trains

Improved thickener operation at Minera Valle Central

Det här kanske också intresserar dig

Utan armatur – ingen mätning!

Mätprincip

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Mätprincip

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Back

Technical Information Cleanfit P CPA472D

Operating Instructions Cleanfit CPA472D

Technical Information Topcal S CPC310

Technical Information Cleanfit P CPA472D

Operating Instructions Cleanfit CPA472D

pH measurement in industrial processes

産業プロセスにおけるpH測定

pH-Messung in Industrieprozessen

L’automatisation des process vaut son pesant d’or

Process automation worth its weight in gold

Prozessautomatisierung, die Gold wert ist

Product family: CleanFit P

Back

Manual Kits CPA472D 2013

Manual CPA472D Retrofit

CPA472D seals not medium cont.

CPA472D Sealing set inside flange Kalrez

CPA472D seal set flange inside Viton

CPA472D Seal set flange inside EPDM

CPA472D seal set G1 1/4" inside EPDM

CPA472D seal set G1 1/4" inside Viton

CPA472D seal set G1 1/4 inside Kalrez

CPA472D seals flange Viton mediumcont.

Sealings set CPA472D Viton

CPA472D Seals flange Kalrez mediumcont.

Sealings set CPA472D Kalrez

CPA472D Seals flange EPDM mediumcont.

Sealings set EPDM for CPA472D G1 1/4"

Kit CPA472/D: 20 pcs. O-ring ID14 W3 FPM

Kit CPA472/D: 2 pcs.O-ring ID14W3 KALREZ

Kit CPA472D Rinse chamber, IN, 316Ti,G,G

Spare parts CPA871, all materials

Kit CPA472D Rinse chamber, IN, Alloy,G,G

Kit CPA472D Rinse chamber, IN, 316Ti,G,N

Kit CPA472D Rinse chamber, IN, Alloy,G,N

Kit CPA472D Rinse chamber, IN, PEEK, F,G

Kit CPA472D Rinse chamber, IN, PVDF,F,G

Kit CPA472D Rinse chamber, IN,PVDF-C,F,G

Kit CPA472D Rinse chamber, IN, 316Ti,F,G

Kit CPA472D Rinse chamber, IN, Alloy,F,G

Kit CPA472D long, 361Ti, D18-I: Sensorg

Kit CPA472D long, Alloy, D18-I: Sensorg

Kit CPA472D short, 361Ti, D18-I: Sensorg

Kit CPA472D short, Alloy, D18-I: Sensorg

Cleaning and calibration system
Liquiline Control CDC90

Cleaning and calibration system
Liquiline Control CDC90