Source Container FQG62 - Radiometric measurement

Radiometric
Level/density measurement
Source Container FQG62

Radiation source container with source holder for manual or pneumatic switch-on/switch-off

FQG62

Jämför

En överblick över specifikationer

Process temperature

Any
Process pressure / max. overpressure limit

Any
Main wetted parts

Non-contact

Visa alla specifikationer

Applikationsområde

The FQG62 source container is designed to hold the radioactive source during radiometric point level detection, continuous level and density measurement. The radiation is emitted almost unattenuated in one direction only, and is damped in all other directions. This guarantees highest safety for the personnel and a reliable measurement.

Designed to hold the radioactive source during radiometric point level detection, continuous level measurement and density measurement. Radiation is emitted almost unattenuated in one direction only, and is damped in all other directions.

Activity: 137Cs to 111GBq (3000mCi), 60Co to 3.7GBq (100mCi)
Temperature: No limitation (non-invasive, extraneous)
Pressure: No limitation (non-invasive, extraneous)

Fördelar

High safety level thanks to highest classification for the source supplied (DIN 25426/ISO 2919, typically classification C66646) and safe and easy source replacement
Reliable measurement due to lightweight container and almost spherical design which provides optimized screening
Compact, easy-to-mount device with the possibility of various angles of emission for optimum adaptation to the application
Manual or pneumatic switching on/off and padlock, cylinder lock or locking bolt for fixing the switching position
Switch status easily identified

Videor

Radiometric measuring principle
Animation source containers
Animation Gamma Modulator

Xpert urvalet

Specialprodukter
Designade för krävande applikationer

Tekniska egenskaper

Enkelhet

Varierande

Vad är FLEX?

Xpert: Hantera dina mest utmanande applikationer

Enkla produkter
Enkla att välja, installera och använda

Tekniska egenskaper

Enkelhet

Vad är FLEX?

Standardprodukter
Pålitliga, robusta och lätta att underhålla

Tekniska egenskaper

Enkelhet

Vad är FLEX?

High-end produkter
Mycket funktionella och praktiska

Tekniska egenskaper

Enkelhet

Vad är FLEX?

Specialprodukter
Designade för krävande applikationer

Tekniska egenskaper

Enkelhet

Varierande

Vad är FLEX?

FLEX urvalet	Tekniska egenskaper	Enkelhet
F L E X Fundamental urvalet Möt dina grundläggande mätbehov	Tekniska egenskaper	Enkelhet
F L E X Lean urvalet Hantera dina kärnprocesser med enkelhet	Tekniska egenskaper	Enkelhet
F L E X Extended urvalet Optimera dina processer med innovativa teknologier	Tekniska egenskaper	Enkelhet
F L E X Xpert urvalet Hantera dina mest utmanande applikationer	Tekniska egenskaper	Enkelhet Varierande

Lär dig mer om FLEX urvalet

Loading alternative products

Föregångare

Source container QG100

Kundcase

Level measurement of silos on construction sites

Discover how Profibaustoffe Austria GmbH automated the monitoring of bulk material inside silos to deliver refills on a "just- in-time" basis.
Läs hela berättelsen
Time saved, safety increased

Employees of Returkraft regularly have to fulfill and document all requirements of the SIL measuring points in the plant.
Läs hela berättelsen
Fit for purpose instrumentation for CNG compressors

The Egyptian government is working to replace liquid fuels with natural gas. To achieve this they targeted increasing the number of CNG stations in their country from 306 to 1000 by the end of 2021.
Läs hela berättelsen
Extend SIL proof test intervals with new Liquiphant FTL51

Discover how our customer CABB was able to extend SIL proof test intervals with the new Liquiphant FTL51
Läs hela berättelsen
Stora produktivitetsvinster hos GE Healthcare

I samband med processförbättringar av lösningsmedelsåtervinning vid GE Healthcares anläggning i Uppsala har man lyckats öka kapaciteten med upp till 65 %. En av flera nyckelkomponenter bakom förbättringarna är Endress+Hausers guidade radar.
Läs hela berättelsen

Mätprincip

Radiometric
Characteristic / Application

Source container
Emission angle: 40 / 20 degrees
Approximately 87kg
Specialities

Manual or pneumatic switch-on/ switch-off
Ambient temperature

-40 °C...+200 °C
(-40 °F...+392 °F)
Process temperature

Any
Process pressure / max. overpressure limit

Any
Main wetted parts

Non-contact
Process connection

Non-contact
Certificates / Approvals

ATEX, GOST

Mätprincip

Radiometric
Characteristic / Application

Source container
Emission angle: 40 / 20 degrees
Approximately 87kg
Specialities

Control area calculation with Applicator
Ambient temperature

-40 °C...+200 °C
(-40 °F ...+392 °F)
Process temperature

Any
Process pressure / max. overpressure limit

Any
Main wetted parts

Non-contact
Process connection

Non-contact
Certificates / Approvals

ATEX, GOST

Mätprincip

Radiometric Limit
Characteristic / Application

Source container
Emission angle: 5 degrees
Approximately 87kg
Specialities

Control area calculation with Applicator
Ambient temperature

-40 °C...+200 °C
(-40 °F...+392 °F)
Process temperature

Any
Process pressure / max. overpressure limit

Any
Main wetted parts

Non-contact
Process connection

Non-contact
Certificates / Approvals

ATEX, GOST

Mätprincip

Radiometric Limit
Characteristic / Application

Source container
Emission angle: 5 degrees
Approximately 87kg
Specialities

Control area calculation with Applicator
Ambient temperature

-40 °C...+200 °C
(-40 °F...+392 °F)
Process temperature

Any
Process pressure / max. overpressure limit

Any
Main wetted parts

Non-contact
Process connection

Non-contact
Certificates / Approvals

ATEX, GOST

Mätprincip

Radiometric Density
Characteristic / Application

Source container
Emission angle: 5/ 20/ 40 degrees
87kg
Ambient temperature

-20 °C...+200 °C
(-40 °F...+392 °F)
Process temperature

Any
Process pressure

Any
Wetted parts

Non-contact
Hygienic

Non-contact
Specialities

Control area calculation with Applicator

Vi värdesätter din integritet

Vi använder cookies för att förbättra din användarupplevelse, samla in statistik för att optimera webbplatsens funktionalitet och leverera skräddarsydda annonser eller innehåll.

Välj "Acceptera alla", för att samtycka till vår användning av cookies.
För mer information se vår Cookie Policy .

	EN	SV
22/10/2019
19/05/2017
24/02/2016
05/08/2015
30/07/2014

Språk:	Svenska
Version:	22/10/2019
Filstorlek:	3.8 MB
Filnamn:	TI00435FSV_1919.pdf

	EN	SV
22/10/2019
19/05/2017
24/02/2016
05/08/2015
30/07/2014

Språk:	Svenska
Version:	22/10/2019
Filstorlek:	3.8 MB
Filnamn:	TI00435FSV_1919.pdf

Språk:	French
Version:	01/01/2011
Filstorlek:	2.1 MB
Filnamn:	TI00456FFR_0111.pdf

Språk:	Engelska
Version:	12/11/2021
Filstorlek:	680.4 KB
Filnamn:	EA01142FA2_0421.pdf

	EN	SV
12/11/2021
02/10/2019
31/07/2018
26/11/2015

	EN	SV
11/10/2013
15/08/2013

	EN	SV
12/04/2012

	EN	SV
26/11/2015

RadiometricLevel/density measurementSource Container FQG62

Radiation source container with source holder for manual or pneumatic switch-on/switch-off

En överblick över specifikationer

Process temperature

Process pressure / max. overpressure limit

Main wetted parts

Applikationsområde

Fördelar

Videor

Xpert urvalet

Föregångare

Kundcase

Level measurement of silos on construction sites

Time saved, safety increased

Fit for purpose instrumentation for CNG compressors

Extend SIL proof test intervals with new Liquiphant FTL51

Stora produktivitetsvinster hos GE Healthcare

Mätprincip

Characteristic / Application

Specialities

Ambient temperature

Process temperature

Process pressure / max. overpressure limit

Main wetted parts

Process connection

Certificates / Approvals

Mätprincip

Characteristic / Application

Specialities

Ambient temperature

Process temperature

Process pressure / max. overpressure limit

Main wetted parts

Process connection

Certificates / Approvals

Mätprincip

Characteristic / Application

Specialities

Ambient temperature

Process temperature

Process pressure / max. overpressure limit

Main wetted parts

Process connection

Certificates / Approvals

Mätprincip

Characteristic / Application

Specialities

Ambient temperature

Process temperature

Process pressure / max. overpressure limit

Main wetted parts

Process connection

Certificates / Approvals

Mätprincip

Characteristic / Application

Ambient temperature

Process temperature

Process pressure

Wetted parts

Hygienic

Specialities

Back

Strålskyddsbehållare FQG61, FQG62 Teknisk information

Strålskyddsbehållare FQG61, FQG62 Teknisk information

Information technique / Mise en service Conteneur de source radioactive FQG61/FQG62

Terminal box

Locking bolt - Installation Instruction

Sealing set for Source container Installation instruction

Proximity switch Installation Instruction

Pneumatic cutoff

Sealing kit for Source container Installation instruction

Sealing kit for Source container Installation instruction

Safety Instructions Radiation Source Container FQG61, FQG62

Back

Padlock FQG6x

Hood FQG61/FQG62, chain, SS

Key > lock QG020/QG100, FQG6x, 2 pcs.

Key > lock FQG61/FQG62, 2 pieces

Terminal box FQG61/FQG62

Setting screw for density, 6x41x15mm

Radiometric
Level/density measurement
Source Container FQG62