CPA474 retractable assembly is designed for harsh chemical applications.

Manual or automatic retractable assembly Cleanfit CPA474

Assembly with ball valve for chemical and industrial wastewater applications

CPA474

Jämför

En överblick över specifikationer

Process temperature

PA version: max. 80 °C (max. 176 °F)
Stainless steel pressure cylinder: max. 120 °C (248 °F)
Process pressure

PA pressure cylinder: max. 6 bar (87 psi)
Stainless steel pressure cylinder: max. 10 bar (145 psi) at 40 °C (104 °F)

Visa alla specifikationer

Applikationsområde

The Cleanfit CPA474 retractable assembly is designed for applications which require safe separation from the process and contain media that could affect stainless steel. It offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.

Cleanfit CPA474 is intended for use in tanks and pipes in:

Chemical industry
Wastewater / industrial water
Power plants
Refuse incinerators

It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA cylinder).

Fördelar

Safe and reliable separation from the process by ball valve, even under harsh conditions
Suitable for corrosive media: Only polymers (PP, PVDF, PEEK) in contact with medium
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Extended operating life of electrodes due to automatic cleaning
Flexible adaptation to all applications by great variety of materials and process connections

Föregångare

CPA463

Kundcase

Automated pH measuring point in wastewater

The Dow plant in Stade relies on Endress+Hauser solutions for pH monitoring in the treatment of production wastewater.
Läs hela berättelsen
Water/steam circuit at GETEC PARK.SWISS

GETEC SWISS.PARK improves plant efficiency and decreases downtimes thanks to Endress+Hauser SWAS System
Läs hela berättelsen
Measurable and testable: Monitoring with Teqwave

Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Läs hela berättelsen
Liquid analysis in LNG trains

The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Läs hela berättelsen
Improved thickener operation at Minera Valle Central

The measurement of interface in thickeners is done manually, while the turbidity measurement is done by obtaining samples sent to the laboratory. With Endress+Hauser there is an automated solution.
Läs hela berättelsen

Enkla produkter
Enkla att välja, installera och använda

Tekniska egenskaper

Enkelhet

Vad är FLEX?

Standardprodukter
Pålitliga, robusta och lätta att underhålla

Tekniska egenskaper

Enkelhet

Vad är FLEX?

High-end produkter
Mycket funktionella och praktiska

Tekniska egenskaper

Enkelhet

Vad är FLEX?

Specialprodukter
Designade för krävande applikationer

Tekniska egenskaper

Enkelhet

Varierande

Vad är FLEX?

FLEX urvalet	Tekniska egenskaper	Enkelhet
F L E X Fundamental urvalet Möt dina grundläggande mätbehov	Tekniska egenskaper	Enkelhet
F L E X Lean urvalet Hantera dina kärnprocesser med enkelhet	Tekniska egenskaper	Enkelhet
F L E X Extended urvalet Optimera dina processer med innovativa teknologier	Tekniska egenskaper	Enkelhet
F L E X Xpert urvalet Hantera dina mest utmanande applikationer	Tekniska egenskaper	Enkelhet Varierande

Lär dig mer om FLEX urvalet

Det här kanske också intresserar dig

Om oss
Utan armatur – ingen mätning!

Säkerheten och enkelheten att hantera en analytisk mätpunkt börjar med rätt armatur. Vår flexibla armaturproduktion säkerställer att du får rätt armatur för dina behov.
Mer information

Mätprincip

Potentiometric
Application

Chemical industry, wastewater, industrial water, power plants, refuse incinerators
Installation

Retractable assembly with ball valve
Characteristic

Open and closed tank, piping (min. DN80)
Design

Manual or pneumatic
Manual or pneumatic ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G1/4" or NPT1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: PP / PEEK / PVDF
Ball valve: PP / PVDF
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF
Rinse connection socket: PVDF
Dimension

Immersion depth: 71 to 207 mm
(2.8 to 8.15 inch)
Process temperature

PA version: max. 80 °C (max. 176 °F)
Stainless steel pressure cylinder: max. 120 °C (248 °F)
Process pressure

PA pressure cylinder: max. 6 bar (87 psi)
Stainless steel pressure cylinder: max. 10 bar (145 psi) at 40 °C (104 °F)
Connection

Process connection DN50, ANSI 2"
Additional certifications

Inspection certificate 3.1 acc. to EN 10204 on demand

Mätprincip

Sensor ORP / Redox
Application

Chemical industry, wastewater, industrial water, power plants, refuse incinerators
Installation

Retractable holder with ball valve
Characteristic

Open and closed tank, piping (min. DN80)
Design

Manual or pneumatic
Manual or pneumatic ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G1/4" or NPT1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: PP / PEEK / PVDF
Ball valve: PP / PVDF
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF
Rinse connection socket: PVDF
Dimension

Immersion depth: 71 to 207 mm (2.8 to 8.15 inch)
Process temperature

PA version: max. 80 °C (max. 176 °F)
Stainless steel pressure cylinder: max. 120 °C (248 °F)
Process pressure

PA pressure cylinder: max. 6 bar (87 psi)
Stainless steel pressure cylinder: max. 10 bar (145 psi) at 40 °C (104 °F)
Connection

Process connection DN50, ANSI 2"

Vi värdesätter din integritet

Vi använder cookies för att förbättra din användarupplevelse, samla in statistik för att optimera webbplatsens funktionalitet och leverera skräddarsydda annonser eller innehåll.

Välj "Acceptera alla", för att samtycka till vår användning av cookies.
För mer information se vår Cookie Policy .

	EN	SV
01/04/2010
01/02/2005
01/09/2003
01/10/2002

Språk:	Engelska
Version:	01/04/2010
Filstorlek:	1009.5 KB
Filnamn:	TI345CEN_0410.pdf

	EN	SV
22/07/2015
01/07/2006

Språk:	Engelska
Version:	22/07/2015
Filstorlek:	2 MB
Filnamn:	TI00404CEN_1315.pdf

	EN	SV
01/04/2010
01/05/2005
01/02/2005
01/01/2004
01/09/2003

Språk:	Japanska
Version:	08/02/2024
Filstorlek:	2.6 MB
Filnamn:	CP00010CJA_1315_1024_pH_selection_guide.pdf

Språk:	Tyska
Version:	01/12/2021
Filstorlek:	3.3 MB
Filnamn:	CP00010CDE_1621_pH Auswahlhilfe_2021.pdf

	EN	SV
01/07/2003

Språk:	Engelska
Version:	02/12/2021
Filstorlek:	3.2 MB
Filnamn:	CP00010CEN_1621_pH selection guide_2021.pdf

	EN	SV
14/08/2020

	EN	SV
01/08/2024

Manual or automatic retractable assembly Cleanfit CPA474

Assembly with ball valve for chemical and industrial wastewater applications

En överblick över specifikationer

Process temperature

Process pressure

Applikationsområde

Fördelar

Föregångare

Kundcase

Automated pH measuring point in wastewater

Water/steam circuit at GETEC PARK.SWISS

Measurable and testable: Monitoring with Teqwave

Liquid analysis in LNG trains

Improved thickener operation at Minera Valle Central

Det här kanske också intresserar dig

Utan armatur – ingen mätning!

Mätprincip

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Additional certifications

Mätprincip

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Back

Technical Information Retractable Assembly Cleanfit CPA474

Technical Information Topcal S CPC310

Operating Instructions Cleanfit CPA474

SD CleanFit Servicekits / Spare part kits

産業プロセスにおけるpH測定

pH measurement in industrial processes

pH-Messung in Industrieprozessen

Product family: CleanFit P

Product family: CleanFit P

Product family: CleanFit P

Back

Manual Kits CPA474 2013

KIT CPA474 Electrode guide PP short

KIT CPA474 electrode guide PVDF short

KIT CPA474 electrode guide PEEK short

KIT CPA474 electrode guide PP long

Kit CPA474 electrode guide PVDF long

KIT CPA474 electrode guide PEEK long

KIT CPA47x:stop bolt with handle (1 pc.)

KIT CPA473/474 cylinder PA short

KIT CPA473/474 cylinder PA long

KIT CPA471 long+474 short: Cylinder SS

KIT CPA473/474 cylinder 1.4404 long

KIT CPA47x pneu.connection G1/8 AD6 10p

KIT CPA47X: Throttel check valve

Kit CPA474 rinsing chamber PP

Kit CPA474 rinsing chamber PVDF

Kit CPA474 rinsing chamber PEEK

Kit CPA474 PP press proof ,rins. chamber

Kit CPA474 PVDF pr.proof, rins. chamber

Kit CPA474 PEEK pr. proof, rins. chamber

KIT CPA474 PP-EPDM, ball valve

KIT CPA474 ball valve PP-VITON

KIT CPA474 PP-FFKM, ball valve

KIT CPA474 PVDF-EPDM, ball valve

KIT CPA474 PVDF-VITON, ball valve

KIT CPA474 PVDF-FFKM, ball valve

KIT CPA474 Actuation pneumatic complete

KIT CPA474 Actuation pneum. compl. el.

Kit CPA47: intermediate flange ball valv

Kit CPA473/474: Connection block pneumat

Pneum. proxim. switches f.retrofitting

Cleaning and calibration system
Liquiline Control CDC90

Cleaning and calibration system
Liquiline Control CDC90