This transmitter is configurable and supports both selected resistance sensor types and thermocouples. In order to obtain the highest measurement precision, linearization characteristics for every type of sensor are stored in the transmitter. The standardized output signal used for process measurement is a 4 to 20 mA signal. This offers fast, easy and cost-saving temperature measuring and reliable measurement values for a wide range of non-ex industry applications.
PC programmable (PCP) temperature head transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal
Suitable for resistance thermometer (RTD) and thermocouple (TC)
Device configuration using PC with configuration kit and PC software ReadWin 2000
Fördelar
2-wire technology, 4 to 20 mA analog output
Fault signal on sensor break or short circuit, presettable to NAMUR NE 43
Since the temperature of compressed hydrogen increases with expansion during filling, temperature measurement is essential at hydrogen filling stations for safety reasons.
Vår beröringsfria temperaturgivare kan enkelt eftermonteras på ett befintligt rör och integreras i styrsystemet för effektiv standby-drift av en turbogeneratorsats.
Den beröringsfria temperaturgivaren iTHERM SurfaceLine TM611 mäter temperatur snabbt och exakt och optimerar värmeväxlarens prestanda och verkningsgrad.
The Ziegler-Natta process uses hazardous chemicals like titanium tetrachloride. Precise temperature measurement is crucial to prevent runaway reactions and ensure safety and efficiency.
To meet the challenges of temperature monitoring in such critical processes, a thermowell design has been developed that responds to process changes up to five times faster than standard designs.
Product family: Accessories: RTD insert, Accessories: TC insert,
ACCESSORIES: T_INSERTS, DIN rail transmitter, Field transmitter, HEAD
TRANSMITTERS, PROCESS RTD DIRECT CONTACT, Process RTD general purpose
Active barrier, 1 channel for 4 to 20 mA, HART® transparent with 24 to 230 V AC/DC as well as active/passive input and output, optionally with SIL and Ex
Active barrier, 1 channel for 4 to 20 mA, HART® transparent with 24 to 230 V AC/DC as well as active/passive input and output, optionally with SIL and Ex
Active barrier, 1 channel for 4 to 20 mA, HART® transparent with 24 to 230 V AC/DC as well as active/passive input and output, optionally with SIL and Ex
Vi använder cookies för att förbättra din användarupplevelse, samla in statistik för att optimera webbplatsens funktionalitet och leverera skräddarsydda annonser eller innehåll.
Välj "Acceptera alla", för att samtycka till vår användning av cookies.
För mer information se vår Cookie Policy .
