En överblick över specifikationer
Process temperature
0 to 140 °C (32 to 284 °F)
Process pressure
0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation 0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation
Applikationsområde
The Cleanfit CPA472D assembly is designed for harsh process conditions. It offers a great variety of rugged materials to operate your sensors safely even under high pressure, high temperature or in aggressive media. The assembly allows you to replace sensors without interrupting the process or to clean and calibrate them automatically via the optional control system. Benefit from easy, time-saving sensor handling and an extended operating life of the sensors.
The Cleanfit CPA472D is intended for installation in tanks or pipes in:
Chemical industry
Power plants
Biodiesel plants
It is suitable for use with pressures of up to 10 bar.
Fördelar
Extremely robust: Suitable for use with pressures of up to 10 bar and temperatures of up to 140° C even as PEEK, PVDF, conductive PVDF versions
Maximum chemical resistance ensures long operating times
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Flexible adaptation to all applications by great variety of materials and process connections
Kundcase
Measurable and testable: Monitoring with Teqwave
Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Läs hela berättelsen
Liquid analysis in LNG trains
The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Läs hela berättelsen
Improved thickener operation at Minera Valle Central
The measurement of interface in thickeners is done manually, while the turbidity measurement is done by obtaining samples sent to the laboratory. With Endress+Hauser there is an automated solution.
Läs hela berättelsen
Enkla produkter
Enkla att välja, installera och använda
Tekniska egenskaper
Enkelhet
Standardprodukter
Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
High-end produkter
Mycket funktionella och praktiska
Tekniska egenskaper
Enkelhet
Specialprodukter
Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
FLEX urvalet
Tekniska egenskaper
Enkelhet
Fundamental urvalet
Möt dina grundläggande mätbehov
Tekniska egenskaper
Enkelhet
Lean urvalet
Hantera dina kärnprocesser med enkelhet
Tekniska egenskaper
Enkelhet
Extended urvalet
Optimera dina processer med innovativa teknologier
Tekniska egenskaper
Enkelhet
Xpert urvalet
Hantera dina mest utmanande applikationer
Tekniska egenskaper
Enkelhet
Det här kanske också intresserar dig
Om oss
Utan armatur – ingen mätning!
Säkerheten och enkelheten att hantera en analytisk mätpunkt börjar med rätt armatur. Vår flexibla armaturproduktion säkerställer att du får rätt armatur för dina behov.
Mer information
Application
Chemical industry, biodiesel plants, power plants, plant design, tanks, process vats or pipes
Characteristic
For tanks and process vats and pipelines or pipes (min. DN80) The robust retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 6 bar
Material
Electrode holder, rinse chamber and raised face: PEEK, PVDF, conductive PVDF, Alloy C22, stainless steel 1.4571 Seals: EPDM, FPM (Viton) or FFKM (Kalrez®)
Dimension
Immersion depth: 146 or 280 mm (5.75 or 7.87 inch)
Process temperature
0 to 140 °C (32 to 284 °F)
Process pressure
0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation 0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation
Connection
Process connections: Flange DN 50, DN 80, ANSI 2", JIS IS10K50A, internal thread G1¼
Application
Chemical industry, biodiesel plants, power plants, plant design, tanks, process vats or pipes
Characteristic
For tanks and process vats and pipelines or pipes (min. DN80) The robust retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 6 bar
Material
Electrode holder, rinse chamber and raised face: PEEK, PVDF, conductive PVDF, Alloy C22, stainless steel 1.4571 Seals: EPDM, FPM (Viton) or FFKM (Kalrez®)
Dimension
Immersion depth: 146 or 280 mm (5.75 or 7.87 inch)
Process temperature
0 to 140 °C (32 to 284 °F)
Process pressure
0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation 0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation
Connection
Process connections: Flange DN 50, DN 80, ANSI 2", JIS IS10K50A, internal thread G1¼
Mest nedladdade
Technical Information
Cleanfit P CPA472D
Engelsk version - 10/2013
Retractable process assembly for pH, ORP and other industry electrodes
Heavy duty version
EN
SV
DE FR IT ZH
08/10/2013
01/06/2010
01/05/2006
Språk:
Engelska
Version:
08/10/2013
Filstorlek:
940.5 KB
Filnamn:
TI00403CEN_1313.pdf
Operating Instructions
Cleanfit CPA472D
Engelsk version - 10/2013
Retractable Process Assembly
EN
SV
CS DE FR IT JA PL
08/10/2013
01/09/2010
01/05/2006
Språk:
Engelska
Version:
08/10/2013
Filstorlek:
1.3 MB
Filnamn:
BA00403CEN_1313.pdf
11 dokument
Technical Information Topcal S CPC310
Fully automatic measuring, cleaningand calibration system in hazardous and non-hazardous areas
EN
SV
Tyska French Italienska Polska Ryska
22/07/2015
01/07/2006
Språk:
Engelska
Version:
22/07/2015
Filstorlek:
2 MB
Filnamn:
TI00404CEN_1315.pdf
Technical Information
Cleanfit P CPA472D
Retractable process assembly for pH, ORP and other industry electrodes Heavy duty version
EN
SV
Tyska French Italienska Kinesiska
08/10/2013
01/06/2010
01/05/2006
Språk:
Engelska
Version:
08/10/2013
Filstorlek:
940.5 KB
Filnamn:
TI00403CEN_1313.pdf
Operating Instructions
Cleanfit CPA472D
Retractable Process Assembly
EN
SV
Tjeckiska Tyska French Italienska Japanska Polska
08/10/2013
01/09/2010
01/05/2006
Språk:
Engelska
Version:
08/10/2013
Filstorlek:
1.3 MB
Filnamn:
BA00403CEN_1313.pdf
pH measurement in industrial processes
Selection and engineering guide for different industries and applications
Språk:
Engelska
Version:
02/12/2021
Filstorlek:
3.2 MB
Filnamn:
CP00010CEN_1621_pH selection guide_2021.pdf
さまざまな産業およびアプリケーション向けのpH測定セレクションガイド
Språk:
Japanska
Version:
08/02/2024
Filstorlek:
2.6 MB
Filnamn:
CP00010CJA_1315_1024_pH_selection_guide.pdf
pH-Messung in Industrieprozessen
Auswahl- und Engineering-Hilfe für verschiedene Industriebranchen und Applikationen
Språk:
Tyska
Version:
01/12/2021
Filstorlek:
3.3 MB
Filnamn:
CP00010CDE_1621_pH Auswahlhilfe_2021.pdf
L’automatisation des process vaut son pesant d’or
Memosens Les sondes de pH améliorent les process chez Agnico Eagle
Språk:
French
Version:
01/07/2016
Filstorlek:
673.1 KB
Filnamn:
CS01496CFR-0216-Agnico Eagle.pdf
Process automation worth its weight in gold
Memosens pH sensors improve processes at Agnico Eagle
Språk:
Engelska
Version:
01/07/2016
Filstorlek:
1.5 MB
Filnamn:
CS01496CEN_0116_Agnico Eagle goldmine.pdf
Prozessautomatisierung, die Gold wert ist
Memosens pH-Sensoren verbessernProzesse bei Agnico Eagle
Språk:
Tyska
Version:
01/07/2016
Filstorlek:
1.5 MB
Filnamn:
CS01496CDE_0116_Agnico Eagle Goldmine.pdf
Product family: CleanFit P
Product root: CPA472D- Declaration number: HE_01324_01.20 Manufacturer specification: Explosion protection
Språk:
Engelska
Version:
14/08/2020
Filstorlek:
187.9 KB
Filnamn:
CPA472D_HE Ex_HE_01324_01.20.pdf
Sök efter reservdelar efter nummer på ritningen
60 spare parts & accessories
60 spare parts & accessories
60 spare parts & accessories
CPA472D seals not medium cont.
Ritningsnummer
Orderkod
6
71024454
CPA472D Sealing set inside flange Kalrez
Ritningsnummer
Orderkod
10
71211749
CPA472D seal set flange inside Viton
Ritningsnummer
Orderkod
10
71211751
CPA472D Seal set flange inside EPDM
Ritningsnummer
Orderkod
10
71211752
CPA472D seal set G1 1/4" inside EPDM
Ritningsnummer
Orderkod
10
71211736
CPA472D seal set G1 1/4" inside Viton
Ritningsnummer
Orderkod
10
71211745
CPA472D seal set G1 1/4 inside Kalrez
Ritningsnummer
Orderkod
10
71211748
CPA472D seals flange Viton mediumcont.
Ritningsnummer
Orderkod
10
71024242
Sealings set CPA472D Viton
Ritningsnummer
Orderkod
10
71027299
CPA472D Seals flange Kalrez mediumcont.
Ritningsnummer
Orderkod
10
71024247
Sealings set CPA472D Kalrez
Ritningsnummer
Orderkod
10
71027302
CPA472D Seals flange EPDM mediumcont.
Ritningsnummer
Orderkod
10
71043257
Sealings set EPDM for CPA472D G1 1/4"
Ritningsnummer
Orderkod
10
71043259
Kit CPA472/D: 20 pcs. O-ring ID14 W3 FPM
Ritningsnummer
Orderkod
10
71090063
Kit CPA472/D: 2 pcs.O-ring ID14W3 KALREZ
Ritningsnummer
Orderkod
10
71090065
Kit CPA472D Rinse chamber, IN, 316Ti,G,G
Ritningsnummer
Orderkod
9
71214026
Spare parts CPA871, all materials
Kit CPA472D Rinse chamber, IN, Alloy,G,G
Ritningsnummer
Orderkod
9
71214033
Kit CPA472D Rinse chamber, IN, 316Ti,G,N
Ritningsnummer
Orderkod
9
71214227
Kit CPA472D Rinse chamber, IN, Alloy,G,N
Ritningsnummer
Orderkod
9
71214228
Kit CPA472D Rinse chamber, IN, PEEK, F,G
Ritningsnummer
Orderkod
20
71214230
Kit CPA472D Rinse chamber, IN, PVDF,F,G
Ritningsnummer
Orderkod
20
71214232
Kit CPA472D Rinse chamber, IN,PVDF-C,F,G
Ritningsnummer
Orderkod
20
71214233
Kit CPA472D Rinse chamber, IN, 316Ti,F,G
Ritningsnummer
Orderkod
20
71214234
Kit CPA472D Rinse chamber, IN, Alloy,F,G
Ritningsnummer
Orderkod
20
71214235
Kit CPA472D long, 361Ti, D18-I: Sensorg
Ritningsnummer
Orderkod
7
71214236
Kit CPA472D long, Alloy, D18-I: Sensorg
Ritningsnummer
Orderkod
7
71214237
Kit CPA472D short, 361Ti, D18-I: Sensorg
Ritningsnummer
Orderkod
7
71214238
Kit CPA472D short, Alloy, D18-I: Sensorg
Ritningsnummer
Orderkod
7
71214239
Kit CPA472D long, 316Ti, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214240
Kit CPA472D long, Alloy, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214242
Kit CPA472D short, 361Ti, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214243
Kit CPA472D short, Alloy, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214244
Kit CPA472D long, PEEK, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214245
Kit CPA472D short, PEEK, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214246
Kit CPA472D long, PVDF, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214247
Kit CPA472D short, PVDF, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214248
Kit CPA472D long, PVDF-C, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214249
Kit CPA472D short,PVDF-C, D25-I: Sensorg
Ritningsnummer
Orderkod
7
71214250
KIT CPA472D man.long Gel:retract.pipe
Ritningsnummer
Orderkod
1
71026649
KIT CPA472D long pneum. Gel: retr. pipe
Ritningsnummer
Orderkod
1
71026651
KIT CPA472D short hand Gel: retr. pipe
Ritningsnummer
Orderkod
1
71026652
KIT CPA472D short pneum. Gel: retr. pipe
Ritningsnummer
Orderkod
1
71026653
Kit CPA472D KCI-pipe manual
Ritningsnummer
Orderkod
16
71102512
Kit CPA472D KCi-pipe pneumatic
Ritningsnummer
Orderkod
16
71102513
KIT CPA472D long: Cylinder 1.4404 w.head
Ritningsnummer
Orderkod
5
71026656
KIT CPA472D short: Cylinder1.4404 w.head
Ritningsnummer
Orderkod
19
71026658
KIT CPA472D with flange: flange DN50
Ritningsnummer
Orderkod
23
71026774
KIT CPA472D with flange: flange ANSI 2"
Ritningsnummer
Orderkod
23
71026776
KIT 472D DN50+ANSI 2", PEEK: raised face
Ritningsnummer
Orderkod
22
71026766
KIT 472D DN50+ANSI 2", PVDF: raised face
Ritningsnummer
Orderkod
22
71026767
KIT 472D DN50+ANSI 2"PVDF-c: raised face
Ritningsnummer
Orderkod
22
71026768
KIT 472D DN50+ANSI 2", HC4: raised face
Ritningsnummer
Orderkod
22
71026770
KIT 472D DN50+ANSI 2",1.4571:raised face
Ritningsnummer
Orderkod
22
71026772
KIT CPA472D with flange: flange DN80
Ritningsnummer
Orderkod
23
71026775
KIT CPA472D DN80 PEEK: raised face
Ritningsnummer
Orderkod
22
71026781
KIT CPA472D DN80 PVDF: raised face
Ritningsnummer
Orderkod
22
71026783
KIT CPA472D DN80 PVDF-cond: raised face
Ritningsnummer
Orderkod
22
71026784
KIT 472D DN80 HC4: raised face
Ritningsnummer
Orderkod
22
71026785
KIT CPA472D DN80 1.4571: raised face
Ritningsnummer
Orderkod
22
71026787
KIT CPA472D with flange: JIS flange
Ritningsnummer
Orderkod
23
71085857
KIT 472D JIS flange, PEEk: raised face
Ritningsnummer
Orderkod
22
71085850
KIT 472D JIS flange, PVDF: raised face
Ritningsnummer
Orderkod
22
71085851
KIT 472D JIS flange, PVDF-C: raised face
Ritningsnummer
Orderkod
22
71085852
KIT 472D JIS flange, HC4: raised face
Ritningsnummer
Orderkod
22
71085854
KIT 472D JIS flange, 316TI: raised face
Ritningsnummer
Orderkod
22
71085856
Kit CPA472D/473: 20retaining washer
Ritningsnummer
Orderkod
18
71103282
KIT 472D HC4, G1/4": Swagelok rinse conn
Ritningsnummer
Orderkod
21
71026794
KIT 472D 1.4571 G1/4: Swagelok rinse con
Ritningsnummer
Orderkod
21
71026796
KIT CPA47x airflow throttle+dummyplug SS
Ritningsnummer
Orderkod
2.8
51503732
KIT CPA47X: Throttel check valve
Ritningsnummer
Orderkod
2
71329949
KIT CPA: elbow conn. R1/8 OD6 SS 2 pcs.
Ritningsnummer
Orderkod
3
71027935
KIT CPA47x: sealing plug M12x1 (10 pcs.)
Ritningsnummer
Orderkod
11
51503733
KIT CPA47x:stop bolt with handle (1 pc.)
Ritningsnummer
Orderkod
4
51503731
KIT CPA472D: cyl. screw M6x70 20 pcs.
Ritningsnummer
Orderkod
15
71026789
KIT CPA471/472 cyl. screw M6x45 20 pcs.
Ritningsnummer
Orderkod
17
51503738
Splash protection cap for assemblies
Ritningsnummer
Orderkod
25
51517522
Protective pipe short f.process assembly
Ritningsnummer
Orderkod
26
51518182
hose support f. Ø6 und Ø8 KCL hose
Protective sleeve wide f. KCl-electr.
Ritningsnummer
Orderkod
27
50080430
Kit CPA472D-KCl: Exit air seal bush PVDF
Pneum. proxim. switches f.retrofitting
Ritningsnummer
Orderkod
12
51502874
KIT CPA47x electr. proxim.switches
Ritningsnummer
Orderkod
13
51502873
Built-in adapt.straight,Size25,1.4404
Built-in adapt.oblique,Size 25,1.4404
flange- welding socket DN50,PN16
Dummy plug 316L, G 1 1/4 inch internal
Locking screw G1/4 inch GL8mm
Hose connection set PVDF, G 1/4"-DN 12
KIT CPA47x pneu.connection G1/8 AD6 10p
Vi värdesätter din integritet
Vi använder cookies för att förbättra din användarupplevelse, samla in statistik för att optimera webbplatsens funktionalitet och leverera skräddarsydda annonser eller innehåll.
Välj "Acceptera alla", för att samtycka till vår användning av cookies.
För mer information se vår Cookie Policy .
Anpassa
Acceptera endast det väsentliga
Acceptera alla