En överblick över specifikationer
-
Accuracy
Standard 0.1%
Platinum 0.075% -
Process temperature
-40°C...+130°C (-40°F...+266°F)
-20°C...+200°C (-4°F...+392°F) -
Pressure measuring range
400 mbar...100 bar
(6 psi...1450 psi) -
Material process membrane
316L
-
Measuring cell
400 mbar...100 bar
(6 psi...1450 psi)
Applikationsområde
The Cerabar PMP43 is a pressure transmitter and part of the Compact Line. The product line is especially developed for hygienic applications and combines a compact design with full performance. The proven technology is suitable for the measurement and monitoring of absolute and gauge pressure in liquids and gases. Thanks to the compact sensor design and small process connections, the device is flexible in scale and can be installed in tight space conditions.
Cerabar PMP43 is used for the measurement of pressure and level in pipelines as well as in process and storage tanks.
The Cerabar PMP43 is suitable for a wide range of hygienic applications:
Pressure monitoring of process pipes
Hydrostatic level measurement in process tanks/pressurized tanks
Pressure monitoring in narrow skids and modules
Fördelar
Outstanding ease of use due to easy setup and operation with guided wizards and intuitive touch display
Improved process and product safety through configuration integrity - a checksum algorithm (CRC) ensures that safety relevant parameters remain unchanged
Increased productivity thanks to traceable and documented on-demand verification without process interruption and permanent monitoring of process anomalies or blocked impulse lines with Heartbeat Technology
360-degree hygienic design and IP69 ingress protection class enable efficient cleaning and avoid contamination
Documented compliance through certified hygienic design as well as proven material conformity and traceability
Videor
Lean urvalet
-
Standardprodukter
- Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
-
Standardprodukter
- Pålitliga, robusta och lätta att underhålla
Tekniska egenskaper
Enkelhet
-
Specialprodukter
- Designade för krävande applikationer
Tekniska egenskaper
Enkelhet
Varierande
FLEX urvalet | Tekniska egenskaper | Enkelhet |
---|---|---|
Fundamental urvalet Möt dina grundläggande mätbehov |
Tekniska egenskaper
|
Enkelhet
|
Lean urvalet Hantera dina kärnprocesser med enkelhet |
Tekniska egenskaper
|
Enkelhet
|
Extended urvalet Optimera dina processer med innovativa teknologier |
Tekniska egenskaper
|
Enkelhet
|
Xpert urvalet Hantera dina mest utmanande applikationer |
Tekniska egenskaper
|
Enkelhet
Varierande |
Föregångare
-
-
Teknisk information (TI)
TI Cerabar PMP43 4-20mA analog
Engelsk version - 09/2024
Pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
1.3 MB
Filnamn:
TI01757PEN_0324-00.pdf
-
-
-
Hygienklassad utrustning
Product family: Cerabar, Cerabar M, Cerabar S, Cerabar T, Ceraphant, Deltabar, Deltabar S, Deltapilot M, Deltapilot S, Levelflex, Li quicap M, Liquiphant, Liquiphant M, Liquipoint, Liquitrend, Micropilot, Nivector, Fermentation monitor, Prosonic S
Engelsk version - 12/2024
Product root: FDU91F-, FMB50-, FMB70-, FMD71-, FMD72-, FMD78-, FMI51-, FMP52-, FMP53-, FMR43-, FMR52-, FMR62-, FMR63B-, FTI26-, FTI5 1-, FTL33-, FTL43-, FTL50H-, FTL51H-, FTL63-, FTW23-, FTW33-, PMC51-, PMC71-, PMP23-, PMP43-, PMP51-, PMP55-, PMP75-, PTP33B-, QMW43 -, QWX43- Region: USA Approval agency: 3-A Sanitary Standards Hygienic equipment: 3-A Sanitary Hygienic standard: 74-07
Språk:
Engelska
Version:
02/12/2024
Filstorlek:
308 KB
Filnamn:
3-A Cert 459_2025.pdf
-
-
-
Teknisk information (TI)
TI Cerabar PMP43 IO-Link
Pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
1.4 MB
Filnamn:
TI01759PEN_0324-00.pdf
-
-
-
Teknisk information (TI)
TI Cerabar PMP43 4-20mA analog
Pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
1.3 MB
Filnamn:
TI01757PEN_0324-00.pdf
-
-
-
Teknisk information (TI)
TI Cerabar PMP43 4-20mA HART
Process pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
1.4 MB
Filnamn:
TI01758PEN_0324-00.pdf
-
-
-
Användarinstruktion (BA)
BA Cerabar PMP43 IO-Link
Process pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
980 KB
Filnamn:
BA02306PEN_0424-00.pdf
-
-
-
Användarinstruktion (BA)
BA Cerabar PMP43 4-20mA analog
Process pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
865.7 KB
Filnamn:
BA02304PEN_0424-00.pdf
-
-
-
Användarinstruktion (BA)
BA Cerabar PMP43 4-20mA HART
Process pressure measurement
EN SV 30/09/2024Språk:
Engelska
Version:
30/09/2024
Filstorlek:
1012.6 KB
Filnamn:
BA02305PEN_0424-00.pdf
-
-
-
Enhetsparameter (GP)
GP Cerabar PMP43
Process pressure measurement
HARTEN SV 25/11/2024Språk:
Engelska
Version:
25/11/2024
Filstorlek:
1.2 MB
Filnamn:
GP01231PEN_0124-00.pdf
-
-
-
Enhetsparameter (GP)
GP Cerabar PMP43
Process pressure measurement
IO-LinkSpråk:
Engelska
Version:
30/09/2024
Filstorlek:
1.1 MB
Filnamn:
GP01227PEN_0124-00.pdf
-
-
-
Kortfattad instruktion (KA)
KA Cerabar PMP43
Tryckmätning
4–20 mA analogEN SV 30/09/2024Språk:
Svenska
Version:
30/09/2024
Filstorlek:
624 KB
Filnamn:
KA01661PSV_0224-00.pdf
-
-
-
Kortfattad instruktion (KA)
KA Cerabar PMP43
Tryckmätning
IO-LinkEN SV 30/09/2024Språk:
Svenska
Version:
30/09/2024
Filstorlek:
696.4 KB
Filnamn:
KA01663PSV_0224-00.pdf
-